Trace Every Pack Back to the Farm in Seconds

How Kenyan exporters, cooperatives and pack houses can answer EU buyers on pesticide residues, avocado rules and deforestation, with one scan instead of three notebooks.

It usually starts with a phone call from Rotterdam, London or Paris. The buyer has a carton of French beans, avocados or herbs in their hands and one question: where exactly was this grown, and what was sprayed on it?

For many Kenyan exporters the honest answer is: give us a few days. The proof sits in a spray book at the farm and in delivery slips at the collection centre. Then there is a spreadsheet at the pack house that does not quite agree with either of them. Meanwhile the container waits, the buyer gets nervous and the next order goes to someone else.

That used to be an inconvenience. In 2026 it is a business risk, because the rules on the other end of the supply chain have changed.

What changed for Kenyan exports in 2026

Three shifts, in Brussels and in Nairobi, are making farm traceability a condition of trade rather than a nice-to-have.

1. Pesticide residues (MRLs) are checked harder and at lower levels.

  • Kenyan fresh beans still face identity and physical checks on 10% of consignments at EU borders. Hot peppers face checks on 20%. Both are listed in EU Implementing Regulation 2026/194.
  • The EU recorded 30 pesticide-residue interceptions on Kenyan green beans in 2025, according to FarmBizAfrica. Agronomists blame farmers lacking correct information on pre-harvest intervals and banned molecules.
  • An interception does not stay with one container. A notified supplier can be shut out for months while extra checks run.
  • In February 2026 France went further. It suspended imports where any detectable residue of four substances is found: carbendazim, thiophanate-methyl, glufosinate and mancozeb. The affected list named by FPEAK includes avocado, mango, beans, peas and peppers.
  • Changes to the EU’s MRL rules have removed more than 30 commonly used active substances, FreshPlaza reports.
  • The cost shows up in the numbers. Kenya’s vegetable export earnings fell to Sh16.1bn in 2025, from Sh23.4bn in 2024, after tighter checks in overseas markets, Business Daily reported.

2. Avocado exports now run on traceability and maturity rules.

  • For the 2026 season, exporters had to submit lists of registered suppliers by 30 March. Packhouse inspections became mandatory from 7 April.
  • Fruit must reach 20–24% dry matter before it clears the airport cargo terminal, and it must move in crates.
  • Rejections of immature fruit can reach 30% in premium markets, costing over KES 7.5bn a year. Licence revocations for non-compliant exporters rose 40% year on year, FreshPlaza reported.
  • In June 2026 the Agriculture and Food Authority launched the National Horticulture Traceability System. Farms are registered and mapped using geolocation, and exporters lead the rollout by registering every farm that supplies export produce, The Star reported.

3. The EU Deforestation Regulation (EUDR) arrives on 30 December 2026.

  • From that date, large and medium operators placing coffee and other covered goods on the EU market must show they come from land that was not deforested. Micro and small operators follow on 30 June 2027, per the European Commission.
  • That proof starts with the location of the plot.
  • In January 2026, AFA’s Director General said only about 30% of Kenya’s coffee farms had been geo-mapped. The EU takes about 60% of Kenya’s coffee exports, IPS reported.

The thread running through all three is the same. Buyers and regulators want to see the farmer, the plot, what was sprayed and when, and which lot it went into. They want it in minutes, not days.

Farm to Fork: one record from plot to pallet

Farm to Fork is a farm traceability system built by Lightswitch in Nairobi for Kenyan exporters, cooperatives and pack houses. It records each step from plot to pallet: sprays, harvests, deliveries, packing and shipments. When a buyer, auditor or regulator asks where a pack came from, you can answer with one scan.

The whole chain runs in four steps:

  1. Register farmers and plots. Record farmer consent in English or Kiswahili, map farms and plot boundaries, and print farmer cards with a QR code.
  2. Record in the field and at the scale. Log sprays from your approved list, with pre-harvest intervals (PHI) and MRLs. Record harvests, deliveries, grades and rejects, and give every farmer a receipt.
  3. Pack and ship with GS1 labels. Handle dispatches, custody handovers and intake QC. Create pack lots with GTIN, lot and best-before, then SSCC pallets and shipments to buyers.
  4. Trace, recall and share. Trace backward and forward in seconds, run timed mock recalls, and put a QR page on every pack with a portal for your buyers.

It runs in the browser, including on a phone. It works for any produce you buy by weight and grade: French beans, avocado, mango, macadamia, tea, coffee, flowers and more. Each product carries its own grades, GTIN, shelf life and yield.

Eight problems Farm to Fork solves

1. “Buyers ask where it was grown, and the proof is in three notebooks”

Every traceability claim starts with knowing who your farmers are and where their plots sit. Farm to Fork registers each farmer once, with consent, and maps each plot.

  • Consent that holds up. Farmers give consent for data processing and, separately, for sharing with buyers. Consent can be withdrawn.
  • Plot maps you can trust. Plot boundaries come with area checks and overlap warnings, so two farmers cannot quietly claim the same land.
  • Fast onboarding. Bulk-import an existing farmer list from a spreadsheet, then print each farmer a card with a QR code.
  • Personal data protected. Phone and ID numbers are stored encrypted and always shown masked.

This matters for avocado and coffee in particular. Kenya’s national system registers and maps supplying farms, and the EUDR starts from the plot. A clean, consented, mapped farmer register is the foundation both depend on.

2. “Spray records live on paper, and one late spray can lose a container”

Wrong information on pre-harvest intervals is one of the causes agronomists cite for Kenya’s bean interceptions. Farm to Fork tackles it before the produce leaves the farm. Field officers record plantings, sprays and harvests against your approved agrochemical list. The system knows each product’s pre-harvest interval and residue limits.

  • Stopped at the scale. If a harvest or delivery falls inside the pre-harvest interval, it is refused at the scale. It is never quietly weighed in and packed.
  • Flagged by market. MRL risks are flagged separately for the EU, UK and US, so you know which market a lot is safe to ship to.
  • Linked to the delivery. Each harvest becomes a lot that the delivery is linked to, so the spray history travels with the produce.

With paper records, a residue problem usually surfaces after the fact. Farm to Fork is designed to stop the risky kilos at the collection scale.

3. “Weights never reconcile, and farmers are paid on trust alone”

When delivered, batched and packed kilograms disagree, someone loses: the farmer, the cooperative or the exporter. Handwritten receipts make kilo and grade disputes hard to settle.

  • Fast lookup. Clerks find the farmer by phone, ID or card, then weigh, grade and print an 80 mm thermal receipt. The receipt can never be changed.
  • Labelled batches. Deliveries are pooled into batches with printed labels.
  • A closed day. The day is closed against the scale, reconciling delivered and batched kilograms.

For a cooperative, this is about trust as much as compliance. A member who walks away with a printed receipt has far less reason to doubt the payout.

4. “We can’t prove our mass balance at the pack house”

Once produce leaves the collection centre, the chain usually breaks. Farm to Fork carries it through dispatch, packing and shipping on global GS1 standards.

  • Custody handovers. Lots move between sites with seals and recorded handovers.
  • Intake QC. Each lot is accepted, held or rejected at intake, with notes. For avocado exporters, this is where fruit that fails your checks is held back before it is packed.
  • GS1 labels. Pack labels carry a GS1 Digital Link QR code, and pallet labels carry an SSCC.
  • Mass balance checks. The system flags any output that exceeds input, the classic sign of mixing or untraceable produce.

5. “A recall takes days”

You know a lot is affected, but not which pallets, shipments and buyers it reached. Farm to Fork walks the chain both ways from any starting point. That can be a pack, pallet or batch, or a farmer, plot or spray product.

  • What it covers. The trace takes in farmers, plots, field activities, handlers, shipments and buyers.
  • Two views. You see a genealogy graph, plus the same data as tables.
  • Ready reports. Download the report as CSV or PDF for your buyer or auditor.

If a buyer calls about one carton, you can trace it back to the exact farmers who supplied it while they are still on the line.

6. “We’ve never tested whether we could actually recall”

Auditors and big buyers want evidence that your recall works, not a written procedure. Farm to Fork lets you start a timed recall drill from any lot. The drill finds sources, derived products, stock on hand and every buyer to contact.

  • Sibling lots. Lots from the same batch are included automatically.
  • Buyer tracking. You mark each buyer as reached, with a note.
  • Timed. The duration is recorded against a 4-hour target.

7. “Consumers and inspectors can’t see our story, and fakes can pass as ours”

Every pack gets a QR code. A consumer, retailer or inspector scans it with any phone and sees a short page with the details below.

  • What the page shows. It shows the product, where it was grown, the harvest, pack and best-before dates, who packed it and its journey.
  • Easy to open. No app and no sign-in are needed, and it is fast on a slow mobile connection.
  • You decide what is public. You choose field by field, and farmer names appear only where the farmer agreed.
  • Counterfeit alerts. Scans from unexpected countries are flagged. That can reveal diverted or counterfeit goods carrying your brand.

8. “Our importers keep emailing for documents”

Instead of answering the same questions by email, give each importer their own sign-in. They see only their own shipments, pack lots, origin and handling timeline, within what you choose to share.

  • Easy search. Buyers search by shipment, PO, pallet SSCC or date.
  • Consent respected. Farmer names show only where the farmer consented to that buyer.
  • Self-service downloads. CSV and PDF downloads are available per shipment.

Built so your records stand up to scrutiny

A traceability record is only worth something if nobody can quietly change it.

  • Records that can’t be rewritten. Every event is stored once in tamper-evident ledger tables. Mistakes are corrected with a new record, never by editing the old one.
  • Two-step sign-in. Administrators, compliance and finance users must use an authenticator app. Accounts lock after repeated wrong passwords.
  • Privacy by design. Consent can be withdrawn. Phone and ID numbers are encrypted, masked, and never shown to buyers or the public.
  • Your data stays yours. Each organisation’s data is kept apart, and users only see their own role and sites. Lightswitch can host Farm to Fork for you, or install it on your own server.
  • Global standards throughout. It uses GS1 GTIN and lot numbers on packs, SSCC on pallets, GLN for sites and GS1 Digital Link QR codes. Every step is stored as an EPCIS 2.0 event, the standard format for sharing supply-chain events.

Why Farm to Fork, and not paper, spreadsheets or generic software

Most Kenyan exporters and cooperatives today choose between three options: paper and spreadsheets, a generic software package, or a system built for the job. Lightswitch sets out the differences like this:

What you need Farm to Fork Paper and spreadsheets Generic software
Trace a pack to its farmers In seconds Days of searching Often lot-level only
GS1 labels and a consumer QR page Built in No Add-on or custom work
PHI check at the collection scale Refused or flagged After the fact Rarely
Timed mock recalls Against a 4-hour target Manual Varies
Farmer consent and privacy Recorded and enforced On paper Varies
Support in Nairobi Lightswitch team None Often overseas

A general comparison by Lightswitch, not a review of any named product.

The table points to five practical advantages.

  1. It prevents problems as well as recording them. Refusing produce inside the pre-harvest interval at the scale is the difference between a near miss and an EU interception.
  2. It goes down to the farmer, not just the lot. Traceability that stops at “lot 47” does not help when the buyer asks which farms supplied it.
  3. It speaks the language of your buyers. GS1 identifiers and EPCIS 2.0 events are the global standards retailers and importers use, so your data does not need translating.
  4. It is built around Kenyan supply chains. It handles smallholder registration, collection centres, thermal receipts, consent in Kiswahili and a QR page that loads on a slow connection.
  5. Help is local. The team that built it is in Nairobi and will walk you through it at your own premises.

Who it’s for

If you are… Farm to Fork helps you…
A fresh produce exporter (French beans, avocado, mango, herbs) Answer EU and UK buyers’ origin and residue questions for every carton
A cooperative Register members once and weigh fairly at every collection centre
An out-grower scheme Tie every delivery to a contracted, mapped plot
A pack house or processor Prove your mass balance, from intake QC to SSCC pallet
An importer or buyer Get your own portal to check shipments, origin and handling

A note for avocado exporters. This season showed how fast the rules can tighten: registered supplier lists, mandatory packhouse inspections and dry-matter checks at the airport. Farm to Fork’s registered and mapped farmers and plots keep your supplier list in one place. Intake QC can hold fruit before it is packed, and GS1 labels trace every carton back to the farm.

A note for coffee and tea. Farm to Fork is not sold as an EUDR filing service, and this post won’t pretend otherwise. What it does give you is part of what deforestation due diligence starts from: consented farmers, mapped plot boundaries with overlap checks, and a record linking each delivery to the lot it went into. If EU buyers are asking you for plot-level origin, ask Lightswitch to show you how that data comes out of the system.

What’s next, stated plainly

Good software vendors tell you what their product doesn’t do yet. Two questions come up often, and Lightswitch answers both openly:

  • Does it work offline in the field? Not yet. Farm to Fork runs in the browser and needs a connection while you record. A mobile app with offline capture is on the roadmap.
  • Can it pay farmers by M-PESA? Not yet. M-PESA payments against deliveries are planned, and the system already records what a payment run needs.

See it on your own produce

The EU’s checks won’t wait for next season, and neither will your buyers. The quickest way to judge Farm to Fork is to trace a pack yourself.

Get free demo access. Send the demo form on the Farm to Fork page and Lightswitch will email you a demo link and sign-in straight away. They will then call to arrange a guided walk-through by Zoom, by phone or at your premises.

Lightswitch has been building business systems, web and mobile apps in Nairobi since 2015.